>제품안내>부품 [센서 및 펄서/리시버]  
Pulser Receiver
종류 :   부품 [센서 및 펄서/리시버]

 

빠르고, 조용하며, 다양한 채널에 높은 처리량을 가지고 있는 고성능의 펄서/리시버.

UT320-스크린 화면 : 무
UT340-스크린 화면 : 유



The following specifications apply to both, UT320 and UT340 pulser receivers.
  Pulser Specifications
Pluse Specifications   Standard Fast
Rise time < 2.0ns < 1.0ns
Fall time < 2.0ns < 1.0ns
Load Impedance 50 ohms 50 ohms
Minimum Load Impedance capacitive to 10 Amps Capacitive to 5.2 Amps
 
Pulse Voltage Control Minimum OUtput voltage 100V 100V
Maximum OutPut Voltage 500V 250V
Maximum VoltageIncrement 2V 2V
 
Pulse Width Control Pulse Width Minimum 5.0 ns 2.0 ns
Pulse Width Maximum 80 ns 80 ns
Pulse Width Resolution 0.20~0.50 ns 0.20~0.50 ns
Pulse Width Accuracy 10% 10%
 
PRF Control PRF Minimum 200Hz 200Hz
PRF Maximum 20kHz 20kHz

  Receiver Specifications
Gain Specification Bandwidth(-3dB) 1 MHz to 150 MHz
Input Impedance 50 ohms
Equivalent Input Noise 100μV p-p max
Maximum Output Level 0 dBm
Output Headroom 6dB
 
Gain Control Voltage Gain Minimum 63dB
Voltage Gain Maximum Gain Increment 1dB

  Interfaces
Serial Communications RS-232 (Connection to host computer)
RS-485 (Connection to additional pulser receivers)
 
User Input/Output Four programmable disital inputs and outputs
Two sets of programmable relay contacts
 
Product Ordering Options

The following options can be specified when ordering UT320 and UT340 instruments:

  • Rack mounting option   Consists of modified front panel design and an option to route front BNC connections to the back panel
     
  • Fast Pulser option    Gives you the pulse raise and fall times that are under 1ns
     
  • Continuously Variable Filter option   Provieds continuously variable second order low-pass and high-pass filtering as selectable RF signal inversion.
     
  • Full Wave Rectifier option